Fitnate 3.5 inches Audio Video Baby Monitor, Wireless Digital Night Vision Safety Viewer
Product description:
Built-in lullabies may help the parent to comfort the baby to fall into sleep.
UPC:
0766008383278Product Specs:
- Material: Plastic
- Transmission frequency: 2400~2483.5 MHz
- Modulation Mode: GFSK
Product description
With infrared night vision function, the baby monitor can automatically adjust to the level of light in the room and transmit a clear image in low-light and darkened room conditions. Built-in lullabies may help the parent to comfort the baby to fall into sleep. And two-Way communication gets the voice from the nursery and calm baby with your voice too. Helpful baby monitor for you to use in daily life.
Note:
- Before use, please read the manual carefully. We recommend you fully charge the Parent Unit (Monitor screen) for 2 hours. And the Child Unit should be always plugged in.
- Any large metal object, like refrigerator, metallic doors or reinforced concrete may block the radio signal.
- Solid Walls, Radio or TV, computers, cordless or mobile phones, fluorescent lights or dimmer switches also will reduce the signal strength.
- Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product.
- so please keep the baby monitor away at least 5ft(1.5m) from these types of products, or turn them off if they appear to be causing interference.
Specification
- Transmission frequency: 2400~2483.5 MHz
- Transmission Power: 17dBm Max.
- Monitor sensitivity: -88dBm
- Spread Spectrum: FHSS
- Modulation Mode: GFSK
- Data rate: 3Mbps
- Transmission range: Outdoor 300m
- Operating Temperature: 0 degree to 40 degrees
- Operating Humidity: <85%
The Monitor
- LCD Size: 3.5″
- Resolution Supported: 320×240
- Viewing angle: H: 80 degrees V: 100 degrees
- Number of camera: Support up to 4 cameras
The Camera
- Image Sensor: 1/3″ Color CMOS Sensor
- Total Picture Pixels: 640 x 480pxl
- Lens: EFL=3.6mm. F=2.8
- View Angle: 70°
- IR LED Type: 8pcs IR LEDS
- Power Consumption (Max.): 100mA
- Power Supply: 5V/500mA DC
Packing List
- 1 x 2.4GHz Camera
- 1 x 3.5″ Receiver
- 1 x US Power Adapter for Camera
- 1 x US Power Adapter for Receiver
- 1 x user manual